Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: GPL-3.0

pragma solidity 0.8.6;

import "@openzeppelin/contracts/access/Ownable.sol";
import "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";
import "@openzeppelin/contracts/token/ERC20/extensions/ERC20Burnable.sol";

contract PoaStakeMerge is Ownable {
    using SafeERC20 for IERC20;

    // bytes4(keccak256(bytes("permit(address,address,uint256,uint256,uint8,bytes32,bytes32)")));
    bytes4 constant _PERMIT_SIGNATURE = 0xd505accf;

    // Swap ratio from WPOA to STAKE multiplied by 1e6
    uint256 public constant SWAP_RATIO = 3142;

    // WPOA token address
    IERC20 public immutable poa;

    // STAKE token address
    IERC20 public immutable stake;

    // UNIX time in seconds when the owner will be able to withdraw the remaining STAKE tokens
    uint256 public withdrawTimeout;

    /**
     * @dev Emitted when someone swap WPOA for STAKE
     */
    event PoaToStake(
        uint256 poaAmount,
        uint256 stakeAmount,
        address indexed grantee
    );

    /**
     * @dev Emitted when the owner increases the timeout
     */
    event NewWithdrawTimeout(uint256 newWithdrawTimeout);

    /**
     * @dev Emitted when the owner withdraw tokens
     */
    event WithdrawTokens(address tokenAddress, uint256 amount);

    /**
     * @dev This contract will receive STAKE tokens, the users will be able to swap their WPOA tokens for STAKE tokens
     *      as long as this contract holds enough amount. The swapped WPOA tokens will be burned.
     *      Once the withdrawTimeout is reached, the owner will be able to withdraw the remaining STAKE tokens.
     * @param _poa WPOA token address
     * @param _stake STAKE token address
     * @param duration Time in seconds that the owner will not be able to withdraw the STAKE tokens
     */
    constructor(
        IERC20 _poa,
        IERC20 _stake,
        uint256 duration
    ) {
        poa = _poa;
        stake = _stake;
        withdrawTimeout = block.timestamp + duration;
    }

    /**
     * @notice Method that allows swap WPOA for STAKE tokens at the ratio of 1 WPOA --> 3.5 STAKE
     * Users can either use the permit functionality, or approve previously the tokens and send an empty _permitData
     * @param poaAmount Amount of WPOA to swap
     * @param _permitData Raw data of the call `permit` of the token
     */
    function poaToStake(uint256 poaAmount, bytes calldata _permitData) public {
        // receive and burn WPOA tokens
        if (_permitData.length != 0) {
            _permit(address(poa), poaAmount, _permitData);
        }

        poa.safeTransferFrom(msg.sender, address(this), poaAmount);
        ERC20Burnable(address(poa)).burn(poaAmount);

        // transfer STAKE tokens
        uint256 stakeAmount = (poaAmount * SWAP_RATIO) / 1e6;
        stake.safeTransfer(msg.sender, stakeAmount);

        emit PoaToStake(poaAmount, stakeAmount, msg.sender);
    }

    /**
     * @notice Method that allows the owner to withdraw any token from this contract
     * In order to withdraw STAKE tokens the owner must wait until the withdrawTimeout expires
     * @param tokenAddress Token address
     * @param amount Amount of tokens to withdraw
     */
    function withdrawTokens(address tokenAddress, uint256 amount)
        public
        onlyOwner
    {
        if (tokenAddress == address(stake)) {
            require(
                block.timestamp > withdrawTimeout,
                "PoaStakeMerge::withdrawTokens: TIMEOUT_NOT_REACHED"
            );
        }

        IERC20(tokenAddress).safeTransfer(owner(), amount);

        emit WithdrawTokens(tokenAddress, amount);
    }

    /**
     * @notice Method that allows the owner to increase the withdraw timeout
     * @param newWithdrawTimeout new withdraw timeout
     */
    function setWithdrawTimeout(uint256 newWithdrawTimeout) public onlyOwner {
        require(
            newWithdrawTimeout > withdrawTimeout,
            "PoaStakeMerge::setWithdrawTimeout: NEW_TIMEOUT_MUST_BE_HIGHER"
        );

        withdrawTimeout = newWithdrawTimeout;

        emit NewWithdrawTimeout(newWithdrawTimeout);
    }

    /**
     * @notice Function to extract the selector of a bytes calldata
     * @param _data The calldata bytes
     */
    function _getSelector(bytes memory _data)
        private
        pure
        returns (bytes4 sig)
    {
        assembly {
            sig := mload(add(_data, 32))
        }
    }

    /**
     * @notice Function to call token permit method of extended ERC20
     + @param token ERC20 token address
     * @param _amount Quantity that is expected to be allowed
     * @param _permitData Raw data of the call `permit` of the token
     */
    function _permit(
        address token,
        uint256 _amount,
        bytes calldata _permitData
    ) internal {
        bytes4 sig = _getSelector(_permitData);
        require(
            sig == _PERMIT_SIGNATURE,
            "PoaStakeMerge::_permit: NOT_VALID_CALL"
        );
        (
            address owner,
            address spender,
            uint256 value,
            uint256 deadline,
            uint8 v,
            bytes32 r,
            bytes32 s
        ) = abi.decode(
                _permitData[4:],
                (address, address, uint256, uint256, uint8, bytes32, bytes32)
            );
        require(
            owner == msg.sender,
            "PoaStakeMerge::_permit: PERMIT_OWNER_MUST_BE_THE_SENDER"
        );
        require(
            spender == address(this),
            "PoaStakeMerge::_permit: SPENDER_MUST_BE_THIS"
        );
        require(
            value == _amount,
            "PoaStakeMerge::_permit: PERMIT_AMOUNT_DOES_NOT_MATCH"
        );

        // we call without checking the result, in case it fails and he doesn't have enough balance
        // the following transferFrom should be fail. This prevents DoS attacks from using a signature
        // before the smartcontract call
        /* solhint-disable avoid-low-level-calls */
        address(token).call(
            abi.encodeWithSelector(
                _PERMIT_SIGNATURE,
                owner,
                spender,
                value,
                deadline,
                v,
                r,
                s
            )
        );
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../utils/Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        _setOwner(_msgSender());
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _setOwner(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _setOwner(newOwner);
    }

    function _setOwner(address newOwner) private {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./extensions/IERC20Metadata.sol";
import "../../utils/Context.sol";

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin Contracts guidelines: functions revert
 * instead returning `false` on failure. This behavior is nonetheless
 * conventional and does not conflict with the expectations of ERC20
 * applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20, IERC20Metadata {
    mapping(address => uint256) private _balances;

    mapping(address => mapping(address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;

    /**
     * @dev Sets the values for {name} and {symbol}.
     *
     * The default value of {decimals} is 18. To select a different value for
     * {decimals} you should overload it.
     *
     * All two of these values are immutable: they can only be set once during
     * construction.
     */
    constructor(string memory name_, string memory symbol_) {
        _name = name_;
        _symbol = symbol_;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view virtual override returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view virtual override returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5.05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless this function is
     * overridden;
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view virtual override returns (uint8) {
        return 18;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view virtual override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view virtual override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20}.
     *
     * Requirements:
     *
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);

        uint256 currentAllowance = _allowances[sender][_msgSender()];
        require(currentAllowance >= amount, "ERC20: transfer amount exceeds allowance");
        unchecked {
            _approve(sender, _msgSender(), currentAllowance - amount);
        }

        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender] + addedValue);
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        uint256 currentAllowance = _allowances[_msgSender()][spender];
        require(currentAllowance >= subtractedValue, "ERC20: decreased allowance below zero");
        unchecked {
            _approve(_msgSender(), spender, currentAllowance - subtractedValue);
        }

        return true;
    }

    /**
     * @dev Moves `amount` of tokens from `sender` to `recipient`.
     *
     * This internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(
        address sender,
        address recipient,
        uint256 amount
    ) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        uint256 senderBalance = _balances[sender];
        require(senderBalance >= amount, "ERC20: transfer amount exceeds balance");
        unchecked {
            _balances[sender] = senderBalance - amount;
        }
        _balances[recipient] += amount;

        emit Transfer(sender, recipient, amount);

        _afterTokenTransfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply += amount;
        _balances[account] += amount;
        emit Transfer(address(0), account, amount);

        _afterTokenTransfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements:
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        uint256 accountBalance = _balances[account];
        require(accountBalance >= amount, "ERC20: burn amount exceeds balance");
        unchecked {
            _balances[account] = accountBalance - amount;
        }
        _totalSupply -= amount;

        emit Transfer(account, address(0), amount);

        _afterTokenTransfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(
        address owner,
        address spender,
        uint256 amount
    ) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}

    /**
     * @dev Hook that is called after any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * has been transferred to `to`.
     * - when `from` is zero, `amount` tokens have been minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens have been burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _afterTokenTransfer(
        address from,
        address to,
        uint256 amount
    ) internal virtual {}
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../ERC20.sol";
import "../../../utils/Context.sol";

/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20Burnable is Context, ERC20 {
    /**
     * @dev Destroys `amount` tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 amount) public virtual {
        _burn(_msgSender(), amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, deducting from the caller's
     * allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `amount`.
     */
    function burnFrom(address account, uint256 amount) public virtual {
        uint256 currentAllowance = allowance(account, _msgSender());
        require(currentAllowance >= amount, "ERC20: burn amount exceeds allowance");
        unchecked {
            _approve(account, _msgSender(), currentAllowance - amount);
        }
        _burn(account, amount);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../IERC20.sol";

/**
 * @dev Interface for the optional metadata functions from the ERC20 standard.
 *
 * _Available since v4.1._
 */
interface IERC20Metadata is IERC20 {
    /**
     * @dev Returns the name of the token.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the symbol of the token.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the decimals places of the token.
     */
    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 999999
  },
  "evmVersion": "berlin",
  "remappings": [],
  "libraries": {},
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"contract IERC20","name":"_poa","type":"address"},{"internalType":"contract IERC20","name":"_stake","type":"address"},{"internalType":"uint256","name":"duration","type":"uint256"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"newWithdrawTimeout","type":"uint256"}],"name":"NewWithdrawTimeout","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"poaAmount","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"stakeAmount","type":"uint256"},{"indexed":true,"internalType":"address","name":"grantee","type":"address"}],"name":"PoaToStake","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"tokenAddress","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"WithdrawTokens","type":"event"},{"inputs":[],"name":"SWAP_RATIO","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"poa","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"poaAmount","type":"uint256"},{"internalType":"bytes","name":"_permitData","type":"bytes"}],"name":"poaToStake","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"newWithdrawTimeout","type":"uint256"}],"name":"setWithdrawTimeout","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"stake","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"withdrawTimeout","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"tokenAddress","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"withdrawTokens","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

0000000000000000000000009fe3864f9ae7cfb5668dae90c0e20c4c3d437664000000000000000000000000b7d311e2eb55f2f68a9440da38e7989210b9a05e000000000000000000000000000000000000000000000000000000000003f480

-----Decoded View---------------
Arg [0] : _poa (address): 0x9fe3864F9Ae7cfb5668Dae90C0e20c4C3D437664
Arg [1] : _stake (address): 0xb7D311E2Eb55F2f68a9440da38e7989210b9A05e
Arg [2] : duration (uint256): 259200

-----Encoded View---------------
3 Constructor Arguments found :
Arg [0] : 0000000000000000000000009fe3864f9ae7cfb5668dae90c0e20c4c3d437664
Arg [1] : 000000000000000000000000b7d311e2eb55f2f68a9440da38e7989210b9a05e
Arg [2] : 000000000000000000000000000000000000000000000000000000000003f480